Notifications

Clear all

rule changes next year (thunder) - lets try this again without name calling

Guest · 2008-11-11T13:03:28Z

Sorry I had to do this, but i will not let my threads be taken over with stupid comments that do nothing to add to the conversation. Now back what was being discussed without the kiddy commentsDerek the promotor from KD contacted me today. He assured me that the rules in regards to thunders were incorrect. I have removed the topic, to avoid false rumors getting around.For next year it will be:1. 602's allows with 100 lbs - 150 lbs penalty, builts as is2. Load bolts in the rear only.Thats it..For the races, the feautres will all be 30 laps, with a consi heat added to give more track time to those that didn't make the semi. A larger payout for the top 10 is also promised.The LLM/thunder/Challenger idea was from Mosport. I was told at AC about the rules as stated in the previous post, by Brian, the promotor for Mosport. I was also told by him Kawartha would be following these rules. Seems thats not the truth.Considering that, I wouldn't make any assumptions in regards to LLM at KD. Might be a good time to call the track if it affects you.Thanks,RossFrom Wade:Ross not jumping on you but gear rules are crap! 2.73 and 3.23 all I can say to that is GAY!! Gear/Shock rules suck good thing they don't apply to those who have a 9" and come to the invitationals but hey that's just my opinion!! I think most of you KD fellas are going to end up with the 602 they have the 2104 and 4412, they don't let the builts have nothing, shoulda gave them the same intake/carb package!!! 100lbs pffft, trust me Ross we seen this @ Flammy they'll get you down the straights!!From RossWouldn't knock the gear rule till you try it. Ran both the gear rule tracks this year with little wear to the engine. What beat the crap out of my engine was running Barrie, Sunset and Peterborough without the gear rule. Peterborough finished of my engine.I'm glad I don't have to run open gear, all its going to do is cost me in engine parts.602, don't buy the hype. I was not impressed at all at Flamborough, nor at Peterbourgh AC (yes I'm eating my words that they would be the dominate motor) Rusnell (sable no cam rule) was pulling on the 602's like he was 500 lbs lighter. Baker was keeping them behind them. The only reason you saw them pull down the straights is because you are looking at a torque motor. Get the gear right on them, and they will pull (see on the track at Flamborough) miss your gear (see AC) and they are a dog. Ironic that the 602 you so admire on the straights lives off a higher gear, much like the gear rule at KD and Mosport Now the second hype. Watching the built motor guys cry about 602's. Its funny. See Wade it goes back to what you said (and I admit I didn't figure it out till you said it) the 602 makes 350 hp with headers and a 4bbl, 310 ish with the 4412 and cast. So time to let the cat out of the bag. One car I ran with at KD was DYNO'd at 320 hp. I finished near him in points, and I could pull on him. Therefor, even I make more power than a 602, and there are alot of guys that pull on me. One fellow with monster motor (he cracked the throttle beside me one the outside at KD when I was hooked up and to the floor and pulled a 1/4 car instantly on me) claims he's be running a 602 next year. Sounds like a bluff if I ever heard one.So no I'm not buying a sealed engine to be 20 hp down to built engines that can be worked on.

Page 5 / 8 Prev Next

Last Post

RSS

Posts: 1498

Thunder6

Nov 13, 2008 5:35 am

(@thunder6)

Noble Member

Joined: 19 years ago

Jim I believe I'll be going with the other H name

I like D-H myself ;D ;D ;D

"Dont be BEECH! And as always comrades, have nice day" fpsrussia

Posts: 0

polishprince12

Nov 13, 2008 8:39 am

(@polishprince12)

Joined: 1 second ago

mr h is obviously Mr. Howard, a very reliable and power building man and a good guy too! might as well give him a shout out as well.

Posts: 0

WadePeterson

Nov 13, 2008 10:04 am

(@WadePeterson)

Joined: 1 second ago

I could surprise you though Jim!! you just never know

Posts: 0

polishprince12

Nov 13, 2008 12:40 pm

(@polishprince12)

Joined: 1 second ago

LOL, i know what you mean! Thats another guy who knows his stuff.

Posts: 0

Junior

Nov 13, 2008 2:10 pm

(@Junior)

Joined: 1 second ago

Jim I believe I'll be going with the other H name

Warren FisHer? I mean thats all that you talked about when you got the car was how you were gonna get Warren to build for you? Im confused Tom? Neither his first name nor his last name start with H, just the middle of his last name?

Page 5 / 8 Prev Next

Forum Statistics

95 Forums

25.6 K Topics

91.4 K Posts

11 Online

22 Members

Latest Post: New One Day Saturday Showcase for the Northeast Classic at New Hampshire Motor Speedway Our newest member: racer61 Recent Posts Unread Posts Tags

Forum Icons: Forum contains no unread posts Forum contains unread posts

Topic Icons: Not Replied Replied Active Hot Sticky Unapproved Solved Private Closed