Forum

Notifications
Clear all

parts for sale


Posts: 0
(@boas51)
Joined: 1 second ago

dart iron eagle 64cc chamber, 200cc intake, angle plug heads with 202-1.6 valves. they have a single spring good to .550 lift. they have never been raced, ran for less than 1/2 hour. $1000 i can upgrade the springs for you.

pro topline 50cc chamber, 200cc intake, cast iron 202-1.6 ferrea valves, dual springs good for over .600 lift. $1000

eagle 3.48” stroke light weight forged crank $400
eagle light weight 6" h beam connecting rods$300
7 srp 398 gram 4.030 bore forged pistons for 6" rod $300 (replacement piston is $130)
2 comp cams dur @ .050 254/259, lift with 1.5 rocker .540/.550 both include matched lifters $100 each.

Complete balanced rotating assembly short block,using above listed parts with hi volume oil pump and champ pan $2500. or add a set of heads, and get a lifter valley tray and vic jr intake for free, $3500

2005 Brown Oval Auto Sports Velocity Chassis IMCA Modified
metric front clip, nova lower control arms, metric spindles, 5 on 5 bolt pattern, rod end adjustable tubular uppers, 2 to 1 steering quickener, 2.5” oil pressure and temp gauges, tach with recall, winters 9” floater, 5.43 gears (can send any gears required), can be run as a 4 link or 2 link either side, or right side z link, lockable birdcages, Can be run as coilover in front or behind diff, or with separate spring on eliminater and shock, or with spring on top of diff on load bolts. J-bar can be run left or right side frame mount. Comes with 4 springs and shocks, rear is coilover, dual master cylinders, hydraulic clutch pedal with master, 22 gallon fuel cell. This car weighs less than 2300# race ready. Comes with 750 barry grant holley gas carb, tilton v-drive triple disc clutch, spare tilton triple disc clutch, Lightweight steel bellhousing, 2 drive shafts, spare upper and lower control arms, rear trailing arms, j-bar, and 4 spare shocks and two new coilover kits, spare body, the headers are both bent, but go with the car, as well i have a rci 32 gallon fuel cell in a steel container which i will include.
Does not include engine, engine accessories, transmission, radiator, battery, wheels or tires, seat, seat belts, or window net.
$7,500.00

Devon Brown
boas51@hotmail.com
306-377-4810
306-831-8074


1 Reply
Posts: 0
(@boas51)
Joined: 1 second ago

Aluminum flywheel and clutch $150

4 threaded spring spacers $50

wilwood pedal and two master cylinders, front mount $150

9” Bicknell floater diff, 60” centered with pullbar mounts and 4 link birdcages $750

vortec heads 906 casting with 202/160 stainless steel 1pce valves, comp dual valve springs good to over .600 lift, screw in studs and guide plates. $1000

Professional products hurricane intake for vortec heads $200


Reply
Share: